The EG02 Intelligent Motorbike Tracker is a compact, Plaspy compatible GPS tracker purpose-built for electric scooters, e-bikes and other light electric vehicles. With a cigarette-lighter form factor and plug-and-play installation, EG02 delivers reliable real-time tracking and event telemetry while minimizing installation time for micro-mobility operators and fleet managers.
Designed for anti-theft protection and efficient fleet management, the EG02 combines GPS + LBS positioning, remote lock/unlock (via mobile app or SMS), and immediate audible alarms on unauthorized movement. Its broad 9–90 V operating range, low standby current and robust positioning accuracy make it an ideal GPS tracker for last-mile fleets, rental scooters, three-wheel EVs and light industrial vehicles when integrated with Plaspy for centralized monitoring and control.
Key Highlights
- Plaspy compatible GPS tracker for micro-mobility: integrates GPS/LBS location and alert data into Plaspy for real-time tracking and reporting.
- Compact, plug-and-play form factor (77 × 29 × 13 mm) for fast retrofit or factory installation without cutting vehicle wiring.
- Intelligent anti-theft and remote immobilizer: automatic power cut to enter arming state plus remote lock/unlock by app or SMS.
- Immediate audible alarm and external buzzer support to locate scooters and deter thefts on the spot.
- Low power draw and wide voltage tolerance (9–90 V) suitable for e-scooters, e-bikes, golf carts and small EVs.
- Accurate GNSS tracking (under 2.5 m CEP) with fast TTFF for dependable real-time location updates.
- Event alerts for speeding, geo-fence entry/exit, power-off and abnormal vibration—good for telemetry and safety monitoring.
How It Works with Plaspy
When integrated with Plaspy, the EG02 streams location and event data over GPRS (TCP/IP) to your Plaspy account while also supporting SMS-based commands where network conditions require. Plaspy receives GNSS/LBS positions, alarm and status telemetry and exposes those data points for dashboard monitoring, automated alerts, and historical reporting. Remote immobilization, audible alarms and geo-fence rules configured in Plaspy let operators act immediately on theft or safety events.
- Real-time location and telemetry updates via GPS + LBS delivered to Plaspy for live tracking and history playback.
- Keyless start / ignition state and remote lock/unlock control surfaced in Plaspy as status events.
- Alerts forwarded to Plaspy for power-off, vibration/unauthorized movement, speeding and geo-fence entry/exit.
- Remote immobilizer support: immobilize vehicles from Plaspy (or via SMS/app) to stop theft in progress.
- External buzzer/siren control and locate-beep commands accessible through Plaspy dashboards or mobile alerts.
Technical Overview
| Connectivity | Quad-band GSM 850/900/1800/1900 MHz; GPRS Class 12 with TCP/IP support |
|---|---|
| Bands | 850 / 900 / 1800 / 1900 MHz (quad-band) |
| Power & Battery | Input voltage 9–90 VDC; built-in 270 mAh / 3.7 V Li‑Po backup battery; typical standby current ≤5 mA on battery |
| Interfaces | Micro‑SIM slot; external buzzer/siren support; configurable alert outputs; built‑in GPS and GSM antennas |
| GNSS | GPS + LBS positioning; L1 frequency, 66 GPS channels; positioning accuracy under 2.5 m CEP; tracking sensitivity –165 dBm; acquisition sensitivity –148 dBm; TTFF hot ≤2 s, cold ≤32 s |
| Bluetooth | Not specified |
| Remote Management | Remote lock/unlock and control via mobile app or SMS; device configurable for alerts and outputs |
| Form Factor & Environment | Dimensions 77.0 × 29.0 × 13.0 mm; weight 43 g; operating temperature –20 °C to +70 °C; IPX5 water resistance |
| Storage | 64 Mb data storage |
Use Cases
- Fleet management for micro-mobility operators: monitor scooter/e-bike locations, manage geo-fences and automate alerts through Plaspy dashboards.
- Anti-theft protection for shared and rental scooters: automatic arming, audible alarms and remote immobilizer reduce loss and speed recovery.
- Manufacturer and aftermarket retrofit: plug-and-play installation for factory fitment or service-center retrofits without cutting vehicle wiring.
- Safety monitoring and incident response: vibration and speed alerts provide telemetry for proactive maintenance and operator safety checks.
- Light industrial and utility vehicles: track small EVs, golf carts and three-wheelers used on campuses or facilities with Plaspy-managed telemetry.
Why Choose This Tracker with Plaspy
EG02 delivers a focused combination of compact design, proven GPS accuracy and purpose-built anti-theft controls that align with Plaspy’s real-time tracking and fleet management capabilities. Its wide voltage range and low standby draw reduce installation constraints across diverse vehicle types, while plug-and-play wiring keeps deployment fast and cost-effective for large fleets.
By integrating EG02 with Plaspy you get a GPS tracker that not only provides reliable real-time tracking and event telemetry, but also practical anti-theft tools—remote immobilizer, audible siren control and automatic arming—delivered through Plaspy’s alerting and control workflows. For micro-mobility operators, manufacturers and fleet managers seeking a compact, robust GPS tracker for scooters and light EVs, EG02 offers a balanced solution for anti-theft, telemetry and scalable fleet management.
Set Up EG02 Intelligent Motorbike Tracker
To set the tracker send the following commands by SMS messages
- Reset factory settings
FACTORY# - Set the time zone UTC-0
GMT,E,0# - Set the operator APN
APN,{{apn}},{{apnu}},{{apnp}}# - Set the GPRS server
SERVER,1,d.plaspy.com,8888,0#
or
NBdOpX8ocikh36D9aM52sKVcDx2jpz - Set the update interval every 60 seconds
TIMER,60#
or
zT3Xkg79tPvt - Enable GPRS mode
GPRSON,1#
To check parameter settings GPRSSET#